Before we drill any boreholes, it is recommended that checks are made to see if planning consent is required from your local planning authority. In the majority of cases, planning consent will already exist under permitted development provisions. Sometimes however, local restrictions may apply if, for example,. .
(Images left to right: Compressor, Drilling Rig) When the drilling team arrives, they will be in one or two crew vehicles, the drilling rig will arrive. .
(Image: Water coming from borehole) We require and use water during the drilling process (we do need you to have a good water supply for our use), we will almost always hit water whilst drilling at some point / depth. The volumes involved can be considerable, as. .
(Images from left to right: Manifold chamber, trench system between boreholes, finished borehole with pipes running into trench) Once the boreholes are completed, the geothermal loops / probes have been inserted and the boreholes packed to. .
(Image: Sump filled with spoil) In addition to water, the drilling will produce a wet aggregate of broken rock and soil from the borehole – generally about 1.5 tonnes of aggregate per 100m of depth. Unless otherwise stated, disposal of this spoil is the responsibility of.
[pdf] Try to turn the compressor by hand. It should be possible to turn it around. It should turn around smoothly, without any 'hickups' (be sure to completely shut down the air compressor!). Check the isolation of the motor windings.
[pdf] Either an electrical problem, or the compressor has tripped on a safety device. Check supply power. Check for errors on display. Check emergency stop is out. Check and reset the overload relay. If it’s a new installation, check the phase sequence. Ambient temperature too high or not enough ventilation.
[pdf] 
