In a drilling rig, the drill line is a multi-thread, twisted wire rope that is threaded or reeved through in typically 6 to 12 parts between the traveling block and crown block to facilitate the lowering and lifting of the drill string into and out of the wellbore.
[pdf] Rotary bits drill the formation using primarily two principles: 1. Rock removal by exceeding its shear strength and 2. Removal by exceeding the compressive strength. The broken rock is removed by rotary scraping or hydraulic cleaning. Either process can also contribute to the initial breakage. Most drilling. .
Diamonds embedded in a matrix have been used since the early Chinese dynasties; however, modern usage for mineral exploration.
[pdf] In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the fluid (air, water or drilling mud) used to actuate the hammer and flush the cuttings. The drill pipes are added to the drill string successively behind the hammer as the hole gets deeper.
[pdf] 
