- First-ever drill rig built on 30-inch wide tracks - Utilizes both hollow-stem and solid-stem augers - Performs both SPT and Modified California sampling - Able to drill down to depths exceeding 20 feet - Our team includes a highly-skilled rock star operator
[pdf] 
DTH is short for “down-the-hole”. Since the DTH method was originally developed to drill large-diameter holes downwards in surface-drilling applications, its name originated from the fact that the percussion mechanism followed the bit down into the hole. Applications were later found for the DTH method. .
A down-the-hole drill, usually called DTH by most professionals, is basically a screwed on the bottom of a . The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a. .
A is first thought to have been used for rock drilling in 1844. Many quarries used hand held tools that required the driller to suspend himself from a rope over the. .
In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the fluid (air, water or drilling mud) used to. .
DTH products can be used in the following applications:• Mining- drill and blast holes in open pit mining, where the drill operator will drill several holes, then. In down-the-hole drilling a drill rod is fitted with a hammer at its lower end. The hammer, which is mounted on the drill bit, is activated through the addition of compressed air and driven into the ground – simultaneously rotating and impacting.
[pdf] Hammer drills have a -action or percussion hammering mechanism, in which two sets of mechanically interact with each other to hammer while rotating the . With cam-action drills, the has a mechanism whereby the entire chuck and bit move forward and backward on the axis of rotation. This type of drill is often used with or without the hammer action, but it is not possible to use th.
[pdf] 
